Setting ATA Taiwan

Filed Under (hardware) by julyono on 06-10-2008 and tagged voip gateway taiwan

*01 Read LAN Port IP

*02 Read PC Port IP

*03 Set LAN Port IP. Pick up the handset, press *03, and then follow the instruction of the phone to set the IP address.

*04 Set PC Port IP. Pick up the handset, press *04, and then follow the instruction of the phone to set the IP address.

*09987456 Reset IP: LAN Port IP: 192.168.0.1 (The new terminal are DHCP

default) PC Port IP: 192.168.5.1(The new terminal are bridge mode.)

*11983185922 Reset system configuration. Return to the default configuration

nyeting linksys voip ATA / SIPhone

Setting manual menggunakan handshet

tekan **** lalu option berikut ini

100 DHCP status, either enabled or disable
101 DHCP enable / disable
110 IP Address of WAN Ethernet port
111 Set static IP address of WAN port. Use * key for decimal point.
120 Check Network mask value
121 Set Network mask. Only works if DHCP is disabled.
130 Check gateway IP address.
131 Set gateway IP address. Only works if DHCP is disabled.
140 Check MAC address of Ethernet port.
150 Check firmware version.
160 Check IP address of primary DNS server.
161 Set IP address of primary DNS server.
170 Check IP port number of phone’s HTTP web server.
732668 Reboot the device
73738 Factory reset all device parameters to default values.
877778 Factory reset user parameters only to default values
Note : Buat setting IP Address atau netmask, gunakan tanda * sebagai pengganti titik. misal 192*168*0*1# untuk save tekan 1
gitu dulu dah